January 8, 20151 Comment

Behind the PSD! – The State Law Building in Brisbane

The state law building brisbane _brockmcfadzean

Here is a recent edit of mine of the State Law building in Brisbane, Australia. It was photographed earlier this year using my iphone5, during my lunchtime break. I wanted to re-edit this image using my Photoshop knowledge and apply some nice tonal ranges for my black and white conversion process.

IMAGE SPECIFIC INFORMATION:
Camera - Iphone 5.

WORKFLOW:

• Creating an appropriate channel of contrast to determine the overall tonal value and range of my black and white conversion. Apply this to a single layer above the background set to Luminosity blending mode.
• Selective colour adjustments to increase the cyan and blue values to add more contrast to the sky.
• Black and white solid colour layer set to colour (black and white conversion).
• A overall 10% highlight increase in a curve.
• Selectively darkening using curves the right hand side of the building and selectively brightening using curves on specific lines of the main building.
• A gradient map fill to accent a vignette to give more depth to the image.
• Sharpening targeted to highlights only using blend-if. For this particular image I used the 'sharpening details' function from within Facebook Powertools Photoshop extension. *Please not this is only available for users of Photoshop CC and higher
• Added noise to the image.

 

building-2-beforeafter

Before / After

January 5, 2015No Comments

Behind the PSD! – A portrait of Cesar Casier

Cesar-Casier-fb2048

It is quite amazing to see how you dictate your vision....endless possibilities and choices of simply changing a simple view of how you edit your image. This particular thought was about how light can effect an image and mood. This natural light image was a (Behind the Scenes) photo whilst I was assisting a photographer late 2013. Quite amazing to see the change of direction of where it came from.

IMAGE SPECIFIC INFORMATION:
Camera - Canon 1D-x with a 24-70mm F2.8 Lens
Exposure - 35mm at F4, 1/125th of a second.

PHOTOSHOP PROCESSING/WORKFLOW

Cesar - Original Image

Original Image
The Original image was opened in Photoshop and I generated a variety of Zone Masks to see the luminosity of each zone mask/channel*. This is ultimately to create the appropriate channels and determine the overall tonal values and range for the image.

2.-zone-10
Zone 10 - The darkest possible zone of highlight information. Very little detail in the eyes or the right side of the face.

3.-zone-9

Zone 9 - Slightly lighter then Zone 10, however starting to have more detail in the skin.

4.-zone-8
Zone 8 - Lighter then both Zone 9 and 10, ability to see more detail within the eyes.

6.-d&b
Zones 8, 9 and 10 were selectively masked with each other to bring out the appropriate amount of light. Ability to merge each layer

7.-heal-and-clone
I used the healing brush to clean up any minor blemishes or imperfections to the image.

Some minor Dodge and Burning to remove the unwanted bumps and scratches on the forehead, and reduce the light inconsistencies that are present on the face.

Removal of the earphones using the clone brush.

8.skin-
Skin adjustment using an Inverted High Pass Adjustment to reduce the transitions of light on the skin.

9-more-d&b
More dodging and burning was required to even out the subtleties to the skin.

Dodged the upper and lower lips and eyes. Selectively masked in some hair detail

10---again-more-d&b
I refined the dodging and burning to create shape (a 3-dimensionsal structure to the face).

Adding more highlights and shadows to the face, opening up the eyes and refining the light fall off.

11---more-d&b-again
Final Dodge and Burn to clean up the image.

12---extra-tweaks
Final tweaks to the image included adding Mid-tone Clarity adjustment using (Adobe Camera Raw) detail to the image only targeted to the Mid-tones and Sharpening targeted to highlights only using blend-if. For this particular image I used the 'sharpening details' function from within Facebook Powertools Photoshop extension. *Please not this is only available for users of Photoshop CC and higher. I also added noise to the image.

before-after
Before / After

January 5, 20151 Comment

Behind the PSD! – Titanic Museum – Belfast. Northern Ireland

IMG_2988-fb2048

This image was photographed at the Titanic Musueum in Belfast, Northern Ireland.

IMAGE SPECIFIC INFORMATION:
Camera - Iphone 5.

CONSIDERATIONS

1. To create a really simple high contrast black and white image.
2. Utilise channels efficiently to produce the desired contrast.
3. Add an appropriate vignette to help focus the viewers attention and create more depth within the image.

PHOTOSHOP PROCESSING

Step 1. Import the original square iphone image into Photoshop CC2014.

IMG_2988-originalOriginal Image

Step 2. Select the appropriate channel to edit the luminosity of the image. As this image is already monochromatic, it only gives you two main options for your choice. Both the composite channel of RGB (or known as grey) as well as the individual channels of red, green, blue which will all be the same value. There is a slight difference between the RGB and the Individual channels.
*Please note that you do have to have the Channels palette open to view your channels within your image. Simply go to File > Window > Channels to display the channel palette if you can't find it.

Step 3. Once the channel is selected decide how you wish to edit the contrast of the Channel. You can use any method of adding contrast to your channel (curves, levels, brightness/contrast methods), I simply used my method of Apply Image to both darken and brighten the contrast of the channel.

IMG_2988-multiply
Original Image, Selected the RGB (Grey) Channel - Multiplied x 3 using Apply Image

IMG_2988-multiply-invert

Same Channel Selected, Inverted the Channel or Selection - Multiplied x 3 using Apply Image

 

IMG_2988-combined-effect
The Inverted Channel of the Last Selection; The combined effect of (6) multiply adjustments only using Apply Image

Step 4. Once the combined channel has been created. I copied this channel onto its own individual layer within the layer stack.
*A useful shortcut I use is by pressing Command/Ctrl + A (select all) then Command/Ctrl + C (copy), Create a new layer (Shift + Command/Ctrl + N) and then to (paste) Command/Ctrl + V.

Step 5. To create a selective vignette using the gradient fill adjustment layer.

IMG_2988-gradient

This Gradient Fill was set to Reflected, 128Degrees and with Reverse enabled.

Step 6. Using the combined channel as a mask for a curve adjustment layer. (exactly the same channel as per step 3).

IMG_2988-curve

This adjustment performed through the combined mask, subtly lifts boost the highlight information.

Step 7. Created a noise layer using the Facebook Powertools Photoshop extension.

IMG_2988-beforeafter

Before / After

January 5, 2015No Comments

BEHIND THE PSD! – A portrait of Paul Giggle.

Paul-Giggle-fb2048

This recent portrait of Paul was photographed when I was assisting him in Milan late last year for his 12 Natural Wonders 2015 Campaign. I wanted to create a natural light portrait of him, showing the depth and qualities of light within the location. This image was captured using only available light with his Lecia S2.

IMAGE SPECIFIC INFORMATION:
Camera - Lecia S2
Exposure - F2.8, 80mm Contax lens, 1/90th sec, ISO 320

paul-giggle---originalOriginal Image


ELEMENTS OF THE RAW CONVERSION

All of my raw files are imported into Aperture 3 for Raw processing. I specifically use Aperture 3 for two main reasons (1) To be able to reduce exposure for the highlights and retain the most amount of detail (2) colour temperature; how the software actually treats my raw file as a base and determine what my "colour temperature" will be. The raw image file was imported into Aperture 3. The image of Paul is slightly overexposed however it doesn't appear to have any highlight clipping warnings. I changed my exposure adjustments of my file to -1.0 recovering nearly all of the blown highlight detail on his face.

paul-giggle---exposureExposure Adjustments Only

The image was then exported as a 8Bit file .PSD file and imported into Photoshop CC 2014 for the remaining bulk of processing and retouching.

CONSIDERATIONS

With regards to the final outcome of the editing, I typically design or create specific outcomes depending on the image. For this particular image, I wanted to create a very high contrast black and white effect to the portrait. With this in mind, I have to create an appropriate edit with several considerations:

1. Choose a suitable black and white conversion method which is appropriate. Does it give enough contrast to the image? Does it allow you to edit selectively or adjust any particular regions within the image?
2. Does the image require any further refinements? Do you need to even out the skin in terms of lighting? Do you need to edit the skin in any way? Are there any refinements needed to be made?
3. What is the chosen output size of the image? Do I require the image to be printed or is it simply used for web?

With these considerations in mind, I am now able to refine and create the desired outcome.

PHOTOSHOP PROCESSING

Step 1. The image was imported into Photoshop CC2014.

Step 2. The image was then processed using my latest Film Styles Action. I selected the Kodak Technidol preset within the action set. This action created the suitable contrast that I desired for my black and white conversion.

1. grade

Step 3. I then added a Grunge Effect set to Multiply blending mode (set to 60% opacity) to reduce the amount of highlight information within the image.

2 grunge and clean

Step 4. I edited an appropriate channel by darkening the highlights using my Generate Highlights action. This selected the luminosity of the image and closed it down by 2 stops. This was selectively masked onto the image. The Blend-if sliders were also adjusted to target the highlights only. If you are not familiar with the use of Blend-if, you can read more about how to effectively use Blend-if Sliders here.

Step 5. I cleaned up the image by removing the dirt from his jacket using the Healing brush. I performed this adjustment using the new Retouching Toolkit by Conny Wallstrom.

Step 6. A selective brighten curve adjustment with an inverted channel as a layer mask, was applied so that it acted like a Digital Reflector. This allowed any adjustment when applied, to selectively brighten any shadow information. As you can see this was selectively applied to the eyes to create better depth in the portrait.

Step 7. A similar adjustment as stage (6) was applied for the iris.

Step 8. I used the Retouching Toolkit to generate a variety of appropriate Dodge and Burning layers to even out the transitions of the skin.

3. d&b

Step 9. I felt the image needed to refine some of the mid-tone contrast. I simply used the camera raw filter as an adjustment layer, applied some Clarity to the image to bring out this mid-tone contrast detail. The layer was then set to 60% opacity and split using Blend-if so that it only filters through the midtones.

4. detail

Step 10. The next step in my workflow was to use my custom sharpening method which I originally learnt from Guy Gowan. It has been adjusted to suit my preferences when working with my files and has the ability to sharpen the highlights and shadows independently.

Step 11. One of my final steps within my workflow is to add a level of noise or grain to my images. This was created using the camera raw filter and applying grain to the image.

Step 12.Lastly the PSD was saved to my appropriate backup hard-drive and a copy of the high res image was exported out onto facebook using the Facebook Powertools.

 

5. Before and After - Paul
Before / After

September 9, 20141 Comment

Facebook Power Tools

The Ultimate Facebook Output Workflow for Photoshop CC and CC2014.

In this blog post, I am wishing to introduce Facebook Power Tools which was developed by Conny Walstrom. Conny is a photographer, retoucher and software developer from Sweden.

As you can see in the image below, Facebook Power Tools is a panel extension built for Adobe Photoshop CC and Adobe Photoshop CC2014. It is designed to specifically improve the quality, and reduce the time it takes to save images for Facebook.

One of the best features of the panel is that your original document isn't effected when you choose the quality of your output. If you choose to use Resize for Maximum Quality it will resize to 2048px (to the longest edge) or 960px (to the longest edge) when you choose Normal Quality. You also have the ability to add and confirm your copyright information to your file.

Being a Facebook user, you also have easier options to create profile pictures and cover photos. This is a serious add-on for any user of Facebook.

facebookpowertools

 The Official Features Include:

  • Creates a merged duplicate before doing any resizing, so that you do not accidentally overwrite your original file.
  • Resizes the image without sharpening! Separate buttons to sharpen for a better result.
  • No input needed! Simply press the buttons and it will do all the hard work for you.
  • ‘Add Noise’ button to help with banding.
  • Create header and profile images with ease.
  • Warns you if you forgot to set a copyright on the image.
  • Easily edit the copyright information.
  • Separate setting for JPEGmini software – If you are hardcore serious about image quality, this is a must!

 

 Facebook Power Tools

[divider style="4"]

DISCLAMIER NOTICE:
We are neither affiliated nor endorsed by Facebook. These tools are provided “as is” without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose and non infringement. In no event shall the author or copyright holders be liable for any claim, damages, or other liability, whether in an action of contract, tort, or otherwise, arising from, out of or in connection with the software or the use or other dealings in the software.